Updated November 2026

Standing desk height adjustment comes down to one goal: setting the work surface so your elbows bend at roughly 90 degrees, your wrists stay straight, and your screen sits at eye level. Get those three things right and you can sit or stand for hours without shoulder strain or neck pain. This guide walks through how to measure, adjust and fine-tune your setup in about 15 minutes.

Measure Your Starting Point

Before you touch the desk, find out what height works for your body. Stand upright in your normal work shoes, with your arms relaxed at your sides. Measure from the floor to the bend of your elbow. That number is your rough target for the desktop when you are standing.

Shopping for one? See our guide: 7 Best Adjustable Height Ergonomic Chairs for Standing Desks (2026).

For seated use, the target is usually a little lower. Sit in your chair with your feet flat and measure from the floor to your elbow again. Many people find the seated height sits a few centimeters below the standing height, which is why a desk that adjusts across a wide range is useful.

Set the Desk Height in Steps

  1. Stand next to the desk with your feet about hip-width apart and your shoulders relaxed.
  2. Raise or lower the surface until your forearms are parallel to the floor and your elbows form a 90-degree angle.
  3. Check that your wrists stay straight, not bent up or down, when your hands rest on the keyboard.
  4. Lock the height using the desk’s controls. Most manufacturers specify a maximum and minimum height, so confirm your target falls inside that range.
  5. Sit down and repeat the check. Your seated elbow angle should still be near 90 degrees, with your feet flat on the floor or a footrest.

Position the Monitor and Keyboard

The desk height only solves half the problem. Your screen and input devices must work with it. Place the top third of your monitor at or just below eye level. If you wear bifocals or progressive lenses, you may need the screen a bit lower, and an eye doctor can advise you on what suits your vision.

Keep the keyboard close enough that you do not reach forward. Your mouse should sit at the same height as the keyboard, not on a raised surface that forces your shoulder up. If your monitor is too high on a standing desk, a monitor arm or riser is often the simplest fix.

Adjust for Standing and Sitting Throughout the Day

You will not need the same height all day. Many desk workers change positions every 30 to 60 minutes. Each time you switch, repeat the elbow check so you do not drift into a slumped or reaching posture. A quick mental reset when you switch helps: stand tall, roll your shoulders back, then adjust.

A Quick Reference

Body check Target
Elbow angle About 90 degrees
Wrist position Straight, neutral
Top of monitor At or just below eye level
Feet (seated) Flat on floor or footrest

Common Mistakes

  • Setting the height once and never rechecking after a chair or shoe change.
  • Raising the desk so high that shoulders creep up toward the ears.
  • Leaving the monitor at desk level, which pushes your head down all day.
  • Ignoring the keyboard and mouse height, so one hand reaches higher than the other.
  • Standing on hard floors in one spot for long periods without a mat or movement breaks.

A monitor arm lets you raise or lower the screen independently of the desk, which helps when your desk height and eye level do not line up. Search for monitor arm to compare options. View on Amazon

An anti-fatigue mat cushions your feet and encourages small weight shifts while standing. View on Amazon

A footrest gives you a place to rest one foot while seated or standing, which can ease lower-back tension. View on Amazon

FAQ

How do I know if my standing desk is at the right height?

Your elbows should form about a 90-degree angle with your wrists straight on the keyboard. If your shoulders rise or your wrists bend, adjust the desk until the position feels relaxed.

Should my desk be lower when I sit down?

Usually yes. A seated height often sits a few centimeters lower than standing height, so your elbows still bend near 90 degrees and your feet can rest flat.

Is a standing desk safe to use all day?

Most people do better alternating between sitting and standing rather than staying in one position. If you have back, neck, joint or circulation concerns, consult a healthcare professional before changing your routine.

Conclusion

Standing desk height adjustment is a simple process: measure your elbows, set the surface to roughly 90 degrees, and align your screen and keyboard to match. Recheck the setup whenever you switch positions or change footwear. A few minutes of setup now can make long workdays noticeably more comfortable.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our fitness at work guides, checking product details against manufacturer specifications and owner feedback.