Updated November 2026
The FlexiSpot Comhar electric standing desk is a motorized desk that lifts and lowers with a push of a button, so you can switch between sitting and standing without moving your monitor or papers. This guide covers what to check before buying a FlexiSpot Comhar electric standing desk, how to set it up, and how to dial in a height that fits your body. By the end, you will have a workstation that is comfortable to use for a full workday.
Check the Desk Dimensions and Weight Limit
Before you order, measure the space where the desk will sit. Allow room for the frame to travel up and down and for your chair to slide underneath. Manufacturers list a maximum load for electric desks, and that figure should include your monitor, laptop, docking station, lamp and any other gear you plan to keep on the surface. Stay under the stated limit rather than close to it, and remember that cable trays and accessories add weight.
Shopping for one? See our guide: 6 Best Standing Desk for Home Office (2026): Expert Picks.
Set Up the Frame and Surface
Most electric desks ship in boxed parts, so work on a clear floor with a second person if the tabletop is large. Follow the manufacturer’s assembly order, tighten all fasteners by hand before torquing them down, and confirm the legs sit square before you plug in the controller. Route the power cords through the cable tray so they do not catch when the desk moves.
- Lay the tabletop face down on a blanket to protect the finish.
- Attach the legs and crossbar according to the included diagram.
- Connect the control box, handset and power cable.
- Run the desk through one full up-and-down cycle with nothing on it to confirm smooth movement.
- Load your equipment and run the cycle again to check stability.
Find Your Ideal Sitting and Standing Heights
Set the height using your body, not a preset. When you sit, your elbows should bend at roughly 90 degrees with your forearms level with the keyboard, your feet flat on the floor, and your thighs close to parallel with the ground. When you stand, your elbows should stay near that same angle, and the top of your monitor should sit at or just below eye level. Use the memory presets on the handset to save both positions so you can switch quickly. Standing Desk Table Topper: A Step-by-Step Guide to Setup (2026) goes further into this.
Monitor and Keyboard Placement
Place the monitor about an arm’s length away. If you use a laptop, raise it on a stand and add an external keyboard so your wrists stay neutral. Recheck these settings after any height change, since moving the desk shifts your screen angle.
Build a Sit-Stand Routine
Standing all day is not the goal. Most people do better alternating positions in short blocks. Many workers start with 30 minutes standing per hour and adjust from there, based on how their feet, legs and lower back feel. For a broader plan, see Using a Standing Desk: 7 Setup and Habit Steps for Your Workday, which covers habit building in more detail. If you spend long stretches standing, Standing Legs for Desk: How to Stand Comfortably for Hours at Work offers useful tips on posture and footwear.
Common Mistakes
- Setting the desk to a height that works for someone else and never adjusting it.
- Overloading the surface past the manufacturer’s stated weight limit.
- Standing still for hours instead of shifting weight or moving every 20 to 30 minutes.
- Leaving cables taut, which can pull on plugs when the desk rises.
- Ignoring the monitor position after changing the desk height.
Recommended Gear
A footrest lets you shift your posture while standing and reduces pressure on your lower back. View on Amazon
A cable tray keeps power cords clear of the frame, which matters on an electric desk that moves. View on Amazon
A monitor arm lets you raise or lower the screen independently of the desk top, which helps when you switch positions. View on Amazon
FAQ
Is the FlexiSpot Comhar electric standing desk easy to assemble?
Assembly usually takes a single session with two people for the larger tabletops. Follow the included instructions closely and tighten fasteners in the order shown.
How do I know if the desk can hold my equipment?
Add up the weight of your monitor, computer, accessories and any clamp-on gear, then compare the total with the maximum load in the product specifications. Leave a margin below that limit.
Should I consult a professional about my posture?
If you have back, neck or joint pain, or an existing condition, speak with a physical therapist or doctor before changing your work setup. They can recommend adjustments that fit your body.
Conclusion
Set the FlexiSpot Comhar electric standing desk up carefully, save a sitting and a standing preset based on your own body measurements, and build short position changes into your day. Recheck your monitor height whenever you move the desk. A few minutes of setup now makes the desk far more comfortable over months of use.

